KELD Insights
When flow demand changes, a pump can be regulated with a valve, a bypass line or by adjusting its speed. For suitable centrifugal pump applications, reducing speed can reduce the energy needed to deliver the required flow, and the result depends on the installation.
The programme for a Chillventa 2026 session on HVAC systems in data centres covers high-efficiency motors, variable frequency drives and the energy use of fans and pumps. For pump manufacturers, this raises a practical question for any pump that runs at part load for much of its life: how should the pump supply flow as demand changes?
Different ways to adjust flow
The public guide produced by Europump, the Hydraulic Institute and the US Department of Energy describes flow regulation using valves, bypass lines and speed adjustment.
These methods change how the pumping system operates. A valve restricts flow by adding resistance. A bypass line returns part of the flow to the suction side or the tank, so the pump keeps delivering more than the system needs. Speed control changes the pump's operation by changing the motor speed.
Why speed control can help
When a centrifugal pump runs at part load for much of its operating time, a lower speed means less energy is put into the liquid, and less has to be throttled or bypassed.
The result depends on the installation. The pressure needed to move the liquid, the resistance of the circuit and the operating range all influence the benefit. A saving from one application cannot simply be applied to another.
What to understand before selecting a drive
The pump's highest required output is one part of the picture. It also matters how often that output is needed and what happens during the rest of the operating time.
For a useful discussion with a supplier, describe the required flow range, the conditions in the installation and the motor to be controlled. Define how the equipment will send its operating commands to the drive.
These details help define a drive for the work the pump must perform. They also help purchasing understand the scope of the proposed electronics.
Where KELD contributes
KELD designs, manufactures and tests pump drives in Zaragoza, Spain. Our applications include water treatment, irrigation and industrial processes.
We develop the drive hardware and control software for the motor and agreed operating requirements. We work with your team on the operating range, control commands and installation in the equipment. We support validation tests in the complete pumping application to confirm the operating results.
Related insights
Sources
- Chillventa 2026 programme — Evaluating HVAC systems in Data Centres — pumps, fans and speed control.
- Europump and Hydraulic Institute with US DOE — Variable Speed Pumping — A Guide to Successful Applications, Executive Summary (May 2004).
- KELD — Variable Speed Drives — pump applications and custom development.
- KELD — Why KELD — design, manufacturing and testing at our Zaragoza facility.
Sources checked 13 November 2026.



