New EU fan regulation: what changes in product information

Table of Contents
    Add a header to begin generating the table of contents

    KELD Insights

    New EU fan regulation: what changes in product information

    Regulation (EU) 2024/1834, known in the industry as ErP 2026, has applied since 24 July 2026 to fans driven by motors with an electrical input power between 125 W and 500 kW. From 24 July 2027 it also requires part-load information, which for most fans means at least three performance curves at different speeds.

    The effects of the new EU fan regulation were included in the Chillventa 2026 programme. For manufacturers and their customers, one important part of the update is the information available when selecting a fan.

    What the update covers

    Regulation (EU) 2024/1834 replaces Regulation (EU) No 327/2011. Some applications are excluded; check whether your fan is covered. It sets minimum efficiency requirements and defines the product information manufacturers must publish. Fan efficiency depends on the aerodynamics and the complete drive system, so it is assessed separately from the motor efficiency rules.

    Why information at different speeds helps

    Customers need to understand what a fan delivers in their equipment. Airflow describes how much air is moved. Pressure describes how much system resistance the fan can overcome at that airflow.

    Electrical power is meaningful when considered alongside the required airflow and pressure. Comparing two fans only by size or speed percentage does not show that they perform the same task.

    Many fans do not run at full speed all the time. Ventilation, cooling and air-handling equipment often operates at reduced speed for long periods, so part-load data shows how the fan performs where it actually operates.

    What manufacturers need to provide

    From 24 July 2027, the regulation requires additional information on part-load or specified operation. For most fans, this means at least three performance curves: one at the inherent speed, one between 40 % and 50 % of that speed, and one roughly midway between the two. Custom fans, jet fans and fans with multiple-speed motors follow different rules.

    Where these curves are required, the technical documentation must indicate the characteristics of the speed regulation device used and the speed of each curve as a percentage of the inherent speed (Article 4(6)). This makes a clear link between the published information and the configuration assessed.

    Where KELD contributes

    KELD designs, manufactures and tests fan drives in Zaragoza, Spain. We develop the hardware and control software for the motor and its intended operation, with motor-mounted and external options.

    We work with your engineers on the operating range, electrical connections and installation requirements. This defines the drive configuration to test in the fan. The fan manufacturer checks the performance and compliance of the complete product.

    Dates and scope

    Different requirements have different application dates: the regulation has applied since 24 July 2026, and the part-load information requirements apply from 24 July 2027. The amended regulation also includes transitional conditions for fans integrated into other products. Use the official texts below to determine the requirements for a specific model.

    Sources

    • Chillventa 2026 programme — “ErP26: die 100 Tage” (session in German), on the new fan regulation and its consequences for manufacturers.
    • European Commission — Regulation (EU) 2024/1834, especially Article 4(6) and Annex II on product and operating information.
    • European Commission — Regulation (EU) 2025/2481 — amendments and transitional provisions.
    • KELD — Variable Speed Drives — fan applications and integration options.
    • KELD — Why KELD — design, manufacturing and testing at our Zaragoza facility.

    Sources checked 13 November 2026.

    latest insights